Aalborg TIO Totalizer I/O Flow Monitor/Controller Uživatelský manuál stáhnout pdf (Strana 23)

If the menu with tabular entry is selected, the available menu options can be set

with the UP and DN buttons and are accepted by pressing the ENT button.

5.3.1 Submenu “Change PP Password”

In order to get access to “Change PP Password” menu, Program Protection must

be disabled. If PP password is set to Zero (Disabled), entering PP Password is not

required and PP can be disabled from “Program Protection” menu (see Figure

5.5). If PP Password is set to any value more than Zero, the firmware will prompt

with “Enter PP Password” (see Figure 5.6). User must enter program protection

code (up to 3 digits). If PP password is lost or forgotten, contact the factory or

your distributor.

NOTE: During data entry the input vales are checked for

acceptability. If data is not acceptable, it is rejected and a message

is generated indicating that the new data has not been accepted.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 97 98

Žádné komentáře

Aalborg TIO Totalizer I/O Flow Monitor/Controller Uživatelský manuál Strana 23