Aalborg TIO Totalizer I/O Flow Monitor/Controller Uživatelský manuál stáhnout pdf (Strana 81)

AALBORG7 TOTALIZER-IO ASCII SOFTWARE INTERFACE COMMANDS

NOTE: AN "*" INDICATES POWER UP DEFAULT SETTINGS.

N "**"INDICATES OPTIONAL FEATURE NOT AVAILABLE ON ALL MODELS.

COMMAND

NAME

DESCRIPTION

NO.

COMMAND SYNTAX

COMMAND ARGUMENT 1 ARGUMENT 2 ARGUMENT 3 ARGUMENT 4 RESPONSE

Flow Requests the current flow

reading in current EU

<Value> (Actual flow in

current engineering units)

Set Point

Set point value in current EU

(Read, Write) With Argument

#2 = ‘S’ set point value will be

saved in the EEPROM

2 S

NO ARGUMENT

(read status)

S:<Value> (Set Point in

current engineering units)

Example: S:20.5

<Value> (write,

not saved in EEP-

ROM memory)

S:<Value> (Set Point in

current engineering units)

Example: S:20.5

<Value>(write,

saved in EEPROM

memory)

S S:<Value> ,S (Set Point in

current engineering units)

Example: S:20.5,S

Density

Read / Set Fluid Density for

standard conditions in g/litr

[0.000001-10000.0] g/litr

3 D

NO ARGUMENT

(read current

value)

D:<Value> (Actual density

in g/litr)

Example: D:1.25

<Value>

(write and save

new value)

D:<Value> (Actual density

in g/litr)

Example: D:1.56

Diagnostic

Events

Read/Reset current status of

Diagnostic Events Register

See list of the Diagnostic

Events below.

NO ARGUMENT

(read status)

DE:0x10 0x10 – diagnostic

word (16 bits wide)

R (reset Event

Log register to

0x0000)

DE:0x0

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 97 98

Komentáře k této Příručce

Žádné komentáře

Aalborg TIO Totalizer I/O Flow Monitor/Controller Uživatelský manuál Strana 81

Komentáře k této Příručce

Související produkty a manuály pro Relé Aalborg TIO Totalizer I/O Flow Monitor/Controller